MATERIALS AND EQUIPMENT
1. 2 (two) palm fiber drum
2. PVC pipe with a diameter of ¾ inch
3. water faucet
4. sand
5. gravel
6. pieces of brick - paint
7. saw
8. parang
9. iron
10. drill
11. brush
12. bucket
13. hoe
MAKING
1. Create a pipe filtering see Figure 1. :
1. Take 2 0.75-inch diameter PVC pipe with a length of 35 cm.
2. Regularly perforated PVC pipe as long as 20 cm.
3. Part of a perforated pipe wrapped with palm fiber and palm tied with plastic straps
4. One end of threaded pipe is made.
Pipe filter mounted on the drum precipitation and filtration with a distance of 10 cm from the bottom of
the drum.
3. Create drum deposition (see Figure 2 and 3)
1. Make a hole with the drill steel 10 cm from the bottom of the drum wall to pipe filter.
2. Replace the filter pipe that has been wrapped in a socket that is already available (see description No.
3. Replace faucets
4. Make a hole at the bottom of the drum with a lid.
1. Make holes for the installation of a filter pipe with a distance of 10 cm from the bottom of the drum.
2. The contents of the drum in a row with 20 cm thick gravels, fibers 5 cm, 10 cm charcoal, palm fiber
10 cm and 10 cm pieces of brick.
5. Preparation of sediment and screening drum (see Figure 3)
1. Drum sedimentation and filtration be nested.
2. The tap-tap is closed and water is filled into drums deposition
3. After 30 minutes of water from precipitation flows into the drum drum filtration.
4. The flow of water out of the screening drum are adjusted with input from the deposition drum.
1. 2 (two) palm fiber drum
2. PVC pipe with a diameter of ¾ inch
3. water faucet
4. sand
5. gravel
6. pieces of brick - paint
7. saw
8. parang
9. iron
10. drill
11. brush
12. bucket
13. hoe
MAKING
1. Create a pipe filtering see Figure 1. :
1. Take 2 0.75-inch diameter PVC pipe with a length of 35 cm.
2. Regularly perforated PVC pipe as long as 20 cm.
3. Part of a perforated pipe wrapped with palm fiber and palm tied with plastic straps
4. One end of threaded pipe is made.
Picture 1. Pipe Filters
2. Installation of the pipe filter (see Figure 2.).Pipe filter mounted on the drum precipitation and filtration with a distance of 10 cm from the bottom of
the drum.
3. Create drum deposition (see Figure 2 and 3)
1. Make a hole with the drill steel 10 cm from the bottom of the drum wall to pipe filter.
2. Replace the filter pipe that has been wrapped in a socket that is already available (see description No.
3. Replace faucets
4. Make a hole at the bottom of the drum with a lid.
Picture 2 Pipe Fitting Filter...
4. Making a drum filter (see Figure 2 and 3)1. Make holes for the installation of a filter pipe with a distance of 10 cm from the bottom of the drum.
2. The contents of the drum in a row with 20 cm thick gravels, fibers 5 cm, 10 cm charcoal, palm fiber
10 cm and 10 cm pieces of brick.
5. Preparation of sediment and screening drum (see Figure 3)
1. Drum sedimentation and filtration be nested.
2. The tap-tap is closed and water is filled into drums deposition
3. After 30 minutes of water from precipitation flows into the drum drum filtration.
4. The flow of water out of the screening drum are adjusted with input from the deposition drum.
Picture 3. How Water Filters can be Work
